Cookie Img
Send Inquiry
Home » Products » Fxofxs Series

Fxofxs Series

We are providing FXS and FXO Series, utilized by analog phone lines, also famed as POTS (Plain Old Telephone Service). These are those interfaces, which really presents the digital line to the subscribers. In another words, the products in this range are those equipments, which present a battery current, dial tone and ring potential. These are also those ports, which get the analog lines. Having minimal maintenance and unbeatable operational fluency, these products have web-based designs. The

FXS and FXO Series we provide come with fiber multiplexers for voice and ethernet. Enclosed with various modes, the products are expandable according to their applications and required functions. Loop-start is the absent signaling on these voice ports. With increased service life and easy installation, these products are available at reduced prices.

Key Features

  • Modification and regeneration of cards.
  • Easily maintained, low operation cost.
  • Caller ID lineaments.
  • Inverse polarity billing utilities.
360 Port Voice PCM Multiplexer
close
360 Port Voice PCM Multiplexer
OP 4E1 4GE 360VO
Fiber Interface(Main and backup)

Number of Ports 2(1+1)
Optical wavelength 850/1310nm for multi-mode fiber,
1310/1550nm for single-mode fiber
Transmission distance 20-120 Km
Fiber Optic Interface Type FC/SC/ST/LC
Data Rate 190Mb/s(GRANCOM proprietary)
Typical output power Single mode 1310/1550nm: ≥8 dBm
Multi-mode 850nm: ≥1 8dBm
Multi-mode 1310nm: ≥2 5dBm
Receiver Sensitivity ≤3 6dBm

Fast Ethernet Interface

Number of Ports 4
Interface Type 10/100 Mbps, auto-negotiation, full/half duplex, flow control, MDI/MDX cross over
Max Frame Size 1916B
Number of VLANs 1-4094 with 64 VLAN support
Port-Based VLAN Untagged, tagged, transparent or double tagged
Connector and LAN Table RJ-45; 1KMAC
Electrical Cable Type Cat.5
Number of Ports Upto 360
Impedance 200Ω+680Ω//0.1uF
Frequency character 300-3400 Hz(-0.6-+3dB)
Weighted noise ≤-65dBmop
Interface loop resistance ≤1800Ω
Compliance ITU G.711 A-Law
8 Channel Fxs Fxo Ports Fiber Multiplexer
close
8 Channel Fxs Fxo Ports Fiber Multiplexer
OP 4ETH 8VO
Fiber Interface


Number of Ports 1
Optical wavelength 850/1310nm for multi-mode fiber,
1310/1550nm for single-mode fiber
Transmission distance 20-120Km
Fiber Optic Interface Type FC/SC
Data Rate 150 Mb/s
Typical output power Single mode 1310/1550nm: -8dBm
Multi-mode 850nm: -18dBm
Multi-mode 1310nm: -25dBm
Receiver Sensitivity -34dBm


Fast Ethernet Interface
Number of Ports 4
Interface Type 10/100 Mbps, auto-negotiation, full/half duplex, flow control, MDI/MDX crossover
Compliance IEEE 802.3, 802.3u and 802.1p&q
Max Frame Size 2047
Connector RJ-45
Electrical Cable Type Cat.5


Power Requirements
Input Voltage: AC:100-240VAC(±10%),50/60Hz
DC:-48VDC(36-72VDC)
Power Consumption <30 watts
96 Voice (Fxs/Fxo) Pots Fiber Multiplexer
close
96 Voice (Fxs/Fxo) Pots Fiber Multiplexer
OP 4ETH 96VO

Fiber Interface
Number of Ports 1
Optical wavelength 850/1310nm for multi-mode fiber,
1310/1550nm for single-mode fiber
Transmission distance 20-120Km
Fiber Optic Interface Type FC/SC
Data Rate 150 Mb/s(GRANCOM proprietary)
Typical output power Single mode 1310/1550nm: ≥-8dBm
Multi-mode 850nm: ≥-18dBm
Multi-mode 1310nm: ≥-25dBm
Receiver Sensitivity ≤-34dBm


Environmental Limits
Operating Temperature 0 to 50°C
Storage Temperature -40 to 85°C
Ambient Relative Humidity 5 to 95% (non-condensing)


Power Requirements
Input Voltage AC:100-240VAC(±10%),50/60Hz
DC:-48VDC(36-72VDC)
Power Consumption <100 watts


Physical Characteristics
Housing Metal
Weight 3.0kg
Dimensions 430 x 200 x 110mm (Standard 2.5U and 19-inch rackmount size)

 



7F Building 1, No.200 Zhenhua Road, Hangzhou - 310030, Zhejiang, China
Mrs. Ella Wang

Product Showcase
Send Inquiry