E1 Over IP Converter
The E1 Over IP Converters, we are offering are the cost effective results for the handed-down telecom services that move to the IP collection networking technology. Adopting the progressive TDM over IP technology, these products have modish designs, which provide the advanced convenience with the accurate timings & straight signals. The predefined grouping factor profiles are in accordance with various application requirements and finally modify the installation process by making it simplified and cutting the maintenance-cost. Users can save a lot of accession and instrumentation costs by using these E1 Over IP Converters and can bring forth a new revenue by offering various kinds of services over surviving ethernet networks.
- Assistance of cascade concatenate.
- Influence single power supplier or double power supplier.
- Integrated with web server, that helps in the easy setup.
- Defy packet loss.
- Easy to set up and maintain
- Strong construction
- Hassle-free performance
- Built-in intelligent switch fabric and provide 4-port fast Ethernet
- Support 2047 bytes frames
- Up to 2K MAC address entries
- Support IEEE802.1Q VLAN and QinQ double tagging
- Support HDLC/PPP-BCP(RFC3518)/GFP-F encapsulation
- Support E1 frame or un-frame application
- Provide statistics for each E1 channel
- Configure via CLI/Web/SNMP(v1/v2c)
- Support software and firmware upgrade
C600x Series Convertors are Fast Ethernet over 1 or 2-port E1 protocol convertors. Ethernet traffic over E1 lines is conveyed to the packet-switched network through the help of unit's Fast Ethernet lefts. The conspectus method influence HDLC/PPP-BCP(RFC3518)/GFP-F.
These devices can be utilized in the comprehensive applications like operating alternate Grancom's CS1200 series, in the hub-and-spoke topology, in MRS46xx series and third-party entries.
Typical applications include:
- Ethernet private Line/LAN services
- IP DSLAM, cellular IP, and WiMAX base station back hauling
- Interoffice or enterprise LAN union.
- E1 Interface
- Amount of Ports: C6002:2, C6001:1
- Interface Regulation: G.703 G.704
- Line Resistance and Connector: 120, balanced, RJ-45 | 75, imbalanced, BNC
- Figure of Ports: 4
- Type: auto-negotiation, flow control, 10/100 Mbps, full/half duplex, MDI/MDX crossover.
- Conformity: Relevant sections of IEEE 802.3
- Max Frame Size : 2047 bytes
- Connector and Electrical Cable Type: RJ-45, Cat.5
- Line Protection: : Built-in 1.5 KV Magnetic Isolation Protection | 6KV/42 surge protection
HDLC (compatible with RAD or RAISECOM's products)
GFP-F(ITU-T G.8040, G.7041/Y.1303)
VCAT (ITU-T G.7043)
LCAS (ITU-T G.7042)
- Number of VLANs : Up to 16
Abidance: Applicable sections of 802.1Q and QinQ double tagging
LAN Table: Up to 2K MAC addresses (learned)
- Console Port
- Interface standard: RS-232
- Connector: RJ-45
- Data rate: 115.2 kbps
- Housing: Metal
- Weight: 1.0kg
- Dimensions: 210 x 142 x 41mm
- Operating Temperature: 0 to 50 oC
- Storehouse Temperature: -40 to 70 oC
- Close Relative Humidity: 10 to 95% (non-condensing)
- Input Voltage:
- AC:100-240VAC(+10%), 50/60Hz
- Power Consumption: <5 watts
Function Description :
- C6001: Fast Ethernet over 1 E1 Raised Protocol Convertor.
- C6002 : Fast Ethernet over 2 E1 Increased Protocol Convertor